|
|
||
|
|
|
|
Dept. of Mechanical and Materials Engineering, Kebangsaan University, Selangor, Malaysia
Selected Publications (For more see the link, Prof. Shahrum Abdullah):
Note: Most of his papers are on fatigue and fracture, topics not covered on this website.
Abdullah, S., S.M. Beden, A.K. Ariffin and M.M. Rahman, 2008. Fatigue life assessment for metallic structure: A case study of shell structure under variable amplitude loading. J. Applied Sci., 8: 1622-1631
Y. S. Kong, M. Z. Omar, L. B. Chua, and S. Abdullah, “Stress behavior of a novel parabolic spring for light duty vehicle,” International Review of Mechanical Engineering, vol. 6, no. 3, pp. 617–620, 2012.
Y. S. Kong, M. Z. Omar, L. B. Chua, and S. Abdullah, “Explicit nonlinear finite element geometric analysis of parabolic leaf springs under various loads,” The Scientific World Journal, vol. 2013, Article ID 261926, 11 pages, 2013.
Layth H. Jawad, S. Abdullah, R. Zulkifli and W.M.F.W. Mahmood, “Numerical investigation on the effect of impeller trimming on the performance of a modified compressor”, CFD Letters, Vol. 5, No. 4, December 2013
A. Othman, S. Abdullah, A. K. Ariffin, N. A. N. Mohamed, On the Crushing Behavior of Foam-Filled Composite Tubes under Compressive Loading. Advanced Materials Research. 2013. Vol. 337 pp: 479-488.
S. Abdullah, A. A. Arifin, A. Othman, A. K. Ariffin, N. A. N. Mohamed, Crushing Behavior of Hybrid Foam-Filled Pultruded Composite under Quasi-Static Oblique Loading. Advanced Materials Research. 2013. Vol. 664 pp 649-653.
Buckling Analysis and Optimization of Stiffened Cylindrical Shells under Uniform Axial Compression
Journal Key Engineering Materials (Volumes 462 - 463)
Volume Fracture and Strength of Solids VII
Edited by Ahmad Kamal Ariffin, Shahrum Abdullah, Aidy Ali, Andanastuti Muchtar, Mariyam Jameelah Ghazali and Zainuddin Sajuri
A. Othman, A.A. Arifin, S. Abdullah, A.K. Ariffin and N.A.N. Mohamed, “Energy absorption of hybrid composite tubes under axial compression”, Applied Mechanics and Materials, Vols. 446-447, pp 109-112, 2014
Djamaluddin F, Abdullah S, Ariffin AK, et al. Multi objective optimization of aluminum foam filled double tubes subjected to oblique impact loading for automobile bumper beam. Appl Mech Mater. 2013;663:93–97.
Djamaluddin F, Abdullah S, Arrifin AK, et al. Modeling and optimization of aluminum foam cylindrical double tubes under axial impact. J Mech Sci. 2014; 8:1383–1392.
F. Djamaluddin, S. Abdullah, A.K. Ariffin and Z.M. Nopiah, “Optimization of foam-filled double circular tubes under axial and oblique impact loading conditions”, Thin-Walled Structures, Vol. 87, pp 1-11, February 2015
F. Djamaluddin, S. Abdullah, A.K. Ariffin and Z.M. Nopiah, “Non-linear finite element analysis of bitubal circular tubes for progressive and bending collapses”, International Journal of Mechanical Sciences, Vol. 99, pp 228-236, August 2015
Md. Rafiquzzaman, S. Abdullah and A.M.T. Arifin, “Behavioural observation of laminated polymer composite under uniaxial quasi-static and cyclic loads”, Fibers and Polymers, Vol. 16, No. 3, pp 640-649, 2015
Djamaluddin F, Abdullah S, Ariffin AK, and Nopiah, Z. M., “Multi objective optimization of foam-filled circular tubes for quasi-static and dynamic responses”, Latin Am J Solid Struct. 2015;12:1126–1143.
A. Othman, S. Abdullah, A.K. Ariffin and N.A.N. Mohamed, “Investigating the crushing behavior of quasi-static oblique loading on polymeric foam filled pultruded composite square tubes”, Composites Part B: Engineering, Vol. 95, pp 493-514, June 2016
Y.S. Kong, S. Abdullah, M.Z. Omar and S.M. Haris, “Topological and topographical optimization of automotive spring lower seat”, Latin American Journal of Solids and Structures, Vol. 13, pp 1388-1405, 2016
Djamaluddin, F., Abdullah, S., Arrifin, A.K. and Nopiah, Z.M, “Finite element analysis and crashworthiness optimization of foam-filled double circular tubes under oblique loading”, Latin American Journal of Solids and Structures, Vol. 13, pp 2176-2189, 2016
Page 2 / 462