|
|
||
|
|
|
|
Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics
Lublin University of Technology, Lublin, Poland
Selected Publications (For more see the link, Dr. Katarzyna Falkowicz):
Katarzyna alkowicz, Miroslaw Ferdynus and Pawel Wysmulski, “FEM analysis of critical loads of a plate with cut-out”, Publisher an date not given in the pdf file. Most recent reference is 2011.
Falkowicz K., Ferdynus M. and Dębski H. (2015): Numerical analysis of compressed plates with a cut-out operating in the geometrically nonlinear range. – Maintenance and Reliability, vol.17, No.2, pp.222-227
K. Falkowicz, P. Mazurek, P. Różyło, P. Wysmulski, W. Smagowski, “Experimental and numerical analysis of the compression of a thin-walled composite plate”, Adv. Sci. Technol., 10 (2016), pp. 177-184
P. Wysmulski, H. Dębski, P. Różyło, K. Falkowicz, “A study of stability and post-critical behaviour of thin-walled composite profiles under compression”, Eksploat. I Niezawodn. - Maint. Reliab., 18 (2016), pp. 632-637
K. Falkowicz, H. Dębski, “Postbuckling behaviour of laminated plates with a cut-out”, Adv. Sci. Technol., 11 (2017), pp. 186-193
P. Rozylo, P. Wysmulski and K. Falkowicz, “FEM and experimental analysis of thin-walled composite elements under compression”, International Journal of Applied Mechanics and Engineering, Vol. 22, No. 2, pp 393-402
K. Falkowicz, “Experimental and numerical analysis of compression of thin-walled composite plates weakened by cut-outs”, Archives of Civil Engineering, Vol. LXII, No. 4, 2017
Katarzyna Falkowicz, “Stability of rectangular plates with notch using FEM”, ITM Web of Conferences, Vol. 15, Article 07013, 2017
Patryk Rozylo, Andrzej Teter, Hubert Debski, Pawel Wysmulski and Katarzyna Falkowicz, “Experimental and numerical study of the buckling of composite profiles with open cross section under axial compression”, Applied Composite Materials, January 2017
Rozylo, P., Teter, A., Debski, H., Wysmulski, P., and Falkowicz, K., 2017, “Experimental and Numerical Study of the Buckling of Composite Profiles With Open Cross Section Under Axial Compression,” Appl. Compos. Mater., 24(5), pp. 1251–1264.
P. Rozylo, H. Debski, P. Wysmulski and K. Falkowicz, “Numerical and experimental failure analysis of thin-walled composite columns with a top-hat cross section under axial compression”, Composite Structures, Vol. 204, pp 207-216, 15 November 2018
Katarzyna Falkowicz, Hubert Debski and Andrzej Teter, “Design solutions for improving the lowest buckling loads of a thin laminated plate with notch”, AIP Conference Proceedings, Vol. 1922, Article 080004, 2018
P. Wysmulski, H. Debski, K. Falkowicz and P. Rozylo, “The influence of load eccentricity on the behavior of thin-walled compressed composite structures”, Composite Structures, Vol. 213, pp 98-107, 1 April 2019
Katarzyna Falkowicz, Hubert Debski, Pawel Wysmulski and Patryk Rozylo, “The behaviour of compressed plate with a central cut-out, made of composite in an asymmetrical arrangement of layers”, Composite Structures, Vol. 214, pp 406-413, 15 April 2019
Katarzyna Falkowicz, “Numerical analysis of behaviour of compressed thin-walled Z-profiles weakened by holes”, MATEC Web of Conferences, Vol. 252, Article 07010, 2019
Page 339 / 462