|
|
||
|
|
|
|
College of Civil Engineering, Department of Structural Engineering, Department of Building Engineering
Tongji University, Shanghai, China
Biography:
Dr. Yuanqi Li, Professor, is a faculty member of Department of Structural Engineering, Tongji University, China. Dr. Li' research interests include design theory of cold-formed steel structures, nonlinear analysis and wind-resistant design of large-span spatial structures, techniques for industrialized steel buildings, etc.. He has secured 6 programs from the National Natural Science Foundation of China, and was a Visiting Professor of Wind Engineering Research Center, Tokyo Polytechnic University, Japan, from 02/2015 to 02/2015 and Visiting Faculty, Department of Civil Engineering, Johns Hopkins University, USA from 08/2013 to 02/2014. Dr. Li published over 100 journal papers in Chinese and English. Now he is Vice Director of National Technology Research Center of Prefabrication Construction in Civil Engineering, China.
Selected Publications (For more see the link Prof. Yuan-Qi LI):
Y.Q. Li. “Stability Research on Large-Span Arch-Supported Reticulated Shell Structures.” Ph.D thesis, Tongji University. (in Chinese). 1998
Y. Q. Li and S. L. Dong, “Random wind load simulation and computer program for large-span spatial structures,” Spatial Structures, vol. 7, pp. 3–12, 2001 (Chinese).
Y.Q. Li and Z.Q. Jing, Free flexural vibration analysis of symmetric rectangular honeycomb panels with SCSC edge supports, Compos. Struct., vol. 83, pp. 154–158, 2008.
Y.Q. Li and D.W. Zhu, Free flexural vibration analysis of symmetric rectangular honeycomb panels using the improved Reddy's third plate theory, Compos. Struct., vol. 88, pp. 33–39, 2009
Hou, B.; Zhao, H.; Li, Y. Impact enhancement of the out-of-plane behaviour of honeycombs. Mater. Res.
Innovations 2011, 15, s209–s212.
Y. Q. Li, L. Wang, Z. Y. Shen and Y. Tamura , Added mass estimation of flat membranes vibrating in still air, J. Wind Eng. Indus. Aerodyn. 99 (2011) 815–824
Yi Zhou, Yuan-Qi Li and Zu-Yan Shen, “An improved stability matrix for co-rotational formulation”, Advances in Structural Engineering, Vol. 15, No. 8, pp 1425-1438, August 2012
Yuanqi Li, Zuyan Shen, Xingyou Yao, Rongkui Ma and Fei Liu, “Experimental investigation and design method research on low-rise cold-formed thin-walled steel framing buildings”, ASCE Journal of Structural Engineering, Vol. 139, No. 5, May 2013
Zu-Yan Shen, Min Lei, Yuan-Qi Li, Zhen-Yu Lin and Jin-Hui Luo, “Experimental study on seismic behavior of concrete-filled L-shaped steel tube columns”, Advances in Structural Engineering, Vol. 16, No. 7, pp 1235-1247, 2013
Y. Zhou, Y. Q. Li, Z. Y. Shen, L. Wang and Y. Tamura , Numerical analysis of added mass for open flat membrane vibrating in still air using the boundary element method, J. Wind Eng. Indus. Aerodyn. 131 (2014) 100–111.
Yuanqi Li, Yinglei Li, Shukun Wang and Zuyan Shen, “Ultimate load-carrying capacity of cold-formed thin-walled columns with built-up box and I section under axial compression”, Thin-Walled Structures, Vol. 79, pp 202-217, June 2014
Shi, X.; Li, Y.; Lu, G.; Shen, C. A testing method for tearing energy of aluminum foams. Mater. Sci. Eng. A
2014, 614, 284–290.
Page 267 / 404