|
|
||
|
|
|
|
Institute for Sustainability and Innovation in Structural Engineering (ISISE), Dept. of Civil Engineering, University of Coimbra, Portugal
Selected Publications (For more see the link, Prof. Joao Pedro Martins):
J.P. Martins, L. Simoes da Silva and A. Reis, “Eigenvalue analysis of cylindrically curved panels under compressive stresses – Extension of rules from EN 1993-1-5”, Thin-Walled Structures, Vol. 68, pp 183-194, July 2013
J.P. Martins, L. Simoes da Silva and A. Reis, “Ultimate load of cylindrically curved panels under in-plane compression and bending – Extension of rules from EN 1993-1-5”, Thin-Walled Structures, Vol. 77, pp 36-47, April 2014
J.P. Martins, Darko Beg, Franc Sinur, L. Simoes da Silva and A. Reis, “Imperfection sensitivity of cylindrically curved steel panels”, Thin-Walled Structures, Vol. 89, pp 101-115, April 2015
T. Manco, C. Rigueiro, J.P. Martins, L. Simões da Silva, “Comparative assessment of the design of tubular elements according to offshore design standards and Eurocode 3”, Steel Constr. Des. Res., 9 (4) (2016) (266-278)
J.P. Martins, L. Simoes da Silva and N. Silvestre, “Energy-based analytical model to predict the elastic critical behaviour of curved panels”, Journal of Constructional Steel Research, Vol. 127, pp 165-175, December 2016
A. Reis, J.O. Pedro, A.B. Graça, C. Hendy, P. Romoli, L. Simões da Silva, J.P. Martins, “Report on the characterization of relevant parameters of curved plated bridge structures and identification of bridge cases where they can be found”, RFCS Research Project OUBURST (RFCS-2015-709782): Deliverable 2.1 (2017)
A. Biscaya da Graça, J. Oliveira Pedro, J.P. Martins, A. Reis, Estado da arte em pontes incluindo painéis metálicos cilíndricos na secção transversal, XI Congr. Construção Metálica e Mista, Coimbra, Portugal (2017)
Filip Ljubinkovic, Joao Pedro Martins and Luis Simoes da Silva, “Cylindrically curved steel panels in bridge design – Buckling and post-buckling behaviour under shear stresses”, EUROSTEEL 2017, Copenhagen, Denmark, September 13-15, 2017
J.P. Martins, F. Ljubinkovic, L. Simoes da Silva and H. Gervasio, “Behaviour of thin-walled curved steel plates under generalized in-plane stresses: A review”, Journal of Constructional Steel Research, Vol. 140, pp 191-207, January 2018
Tiago Manco, Joao Pedro Martins, Constanca Rigueiro and Luis Simoes da Silva, “Semi-analytical model for the prediction of the post-buckling behaviour of unstiffened cylindrically curved steel panels under uniaxial compression”, Marine Structures, Vol. 59, pp 387-400, May 2018
Trayana Tankova, João Pedro Martins, Luís Simões da Silva, Rui Simões and Helder D. Craveiro, “Experimental buckling behaviour of web tapered I-section steel columns”, Journal of Constructional Steel Research, Vol. 147, pp 293-312, August 2018
Page 350 / 404