|
|
||
|
|
|
|
Department of Civil and Environmental Engineering
University of Edinburgh
Selected Publications:
J. M. F. G. Holst and C. R. Calladine, “Inversion problems in elastic thin shells”, Eur. J. Mech. vol. 13, pp. 3–18, 1994.
Holst, J.M.F.G., “Large deflection phenomena in cylindrical shells”, 1996
http://www-civ.eng.cam.ac.uk/abstract/holstabs.htm
Holst, J.M.F.G., Rotter, J.M. and Calladine, C.R., “Geometric imperfections and consistent residual stress fields in elastic cylinder buckling under axial compression”, Proc. Int. Workshop: Imperfections in Metal Silos: Measurement, Characterisation and Strength Analysis, CA-Silo, Lyon, France, 19 April, pp 199–216, 1996.
Rotter, M., Ooi, J., Holst, M., Zhang, Z., “Comparative Evaluation of Numerical Methods for Predicting Flow and Stress Fields in Silos”. EPSRC DEM-FEM International Collaboration, CA-SILO Collaborative Action: WG5, 1997.
Rotter, J. M., Holst, J. M. F. G., Ooi, J. Y., Sanad, A. M., “Silo pressure predictions using discrete-element and finite-element analyses”. Phil. Trans. R. Soc. London. A.,356: 2685–2712, 1998.
Holst, J. M., Rotter, J. M., and Calladine, C. R., "Imperfections in Cylindrical Shells Resulting from Fabrication Misfits," Journal of Engineering Mechanics, Vol. 125, No. 4, pp 410-418, 1999.
Holst, J. M. F. G., Ooi, J. M., Rotter, J. M., Rong G. H., “Numerical modeling of silo filling.I: Continuum analysis”. J. Engng. Mech., ASCE,125(1): 94–103, 1999.
Holst, J. M. F. G., Ooi, J. M., Rotter, J. M., Rong G. H., “Numerical modeling of silo filling. II: Discrete element analysis”. J. Engng. Mech., ASCE,125(1): 104–110, 1999.
Holst, J.M.F.G., Rotter, J.M. and Calladine, C.R., “Imperfections and buckling in cylindrical shells with consistent residual stresses”, Journal of Constructional Steel Research, Vol. 54, No. 2, pp. 265–282, 2000.
Holst, J.M.F.G., Rotter, J.M., Gillie, M. and Münch, M., “Failure criteria for shells on local bracket supports”, New Approaches to Structural Mechanics, Shell and Biological Structures, edited by H. Drew and S. Pellegrino, Kluwer Academic Publishers, London, 2002.
M. Cai, M.F.G. Holst, J.M. Rotter, “Buckling strength of thin cylindrical shells under localized axial compression”, in: 15th ASCE Engineering Mechanics Conference, Columbia University, New York, NY, 2002, pp. 1-8.
Cai M., Holst J.M.F.G. & Rotter J.M., "Buckling of cylindrical tank shells under local axial compression stresses" Int. Conf. on Design, Inspection, Maintenance and Operation of Cylindrical Steel Tanks and Pipelines, ECCS, Prague, Czech Republic, 70-76, 2002.
Holst J M F G, and Rotter J M, “Buckling strength of cylinders with a consistent residual stress state”, Advances in Steel Structures (ICASS ‘02), vol II, 729–736, 2002.
Cai M., Holst J.M.F.G. & Rotter J.M., "Parametric study on the buckling of thin steel cylindrical shells under elevated axial compression stresses" 16th ASCE Engineering Mechanics Conference, University of Washington, Seattle, 2003.
J.M.F.G. Holst and J.M. Rotter, “Settlement beneath cylindrical shells”, Chapter 4 in Buckling of thin metal shells, edited by J. G. Teng and J. Michael Rotter, 2004, Spon Press, ISBN 0-203-30160-9
Minjie Cai, J. Mark F.G. Holst and J. Michael Rotter, “Elastic buckling of thin cylindrical shells under local axial compressive stresses”, Fourth International Conference on Advances in Steel Structures, Proceedings of the Fourth International Conference on Advances in Steel Structures (ICASS ’05), edited by Z.Y. Shen, G.Q. Li and S.L. Chan, 13–15 June 2005, Shanghai, China, 2005, Pages 389-394, Elsevier
Holst J.M.F.G. & Rotter J.M., "Axially compressed cylindrical shells with local settlement" Thin-Walled Structures, 43, 811-825, 2005.
For more see the link, Dr. J. Mark F. G. Holst
Page 48 / 404