|
|
||
|
|
|
|
See:
http://www.stru.polimi.it/IT/Personale.plp?category=docente;choosenletter=p;people=1983
Dipartimento di Ingegneria Strutturale
Politecnico di Milano, Italy
website: www.stru.polimi.it/people/poggi/index.html
Selected Publications:
Giavotto V., Poggi C., Castano D., Guzzetti D., Fezzani M. Buckling Behavior of Composite Shells under Combined Loading // Proceedings of 17th European Rotorcraft Forum - Berlin, September 1991, pp. 84-1-84-13.
Poggi C. Characterisation of materials, Brite – Euram Project: DEVILS, Report WP04.DR/PM(1), Politecnico di Milano, Italy, 1996.
Carvelli V., Panzeri N. and Poggi C., 2000. Numerical and experimental buckling analysis of GFRP shells for under-water vehicles, Computational Methods for Shell and Spatial Structures, IASS-IACM, Athens, Greece 2000
V. Carvelli, N. Panzeri and C. Poggi (Department of Structural Engineering, Polytechnic of Milan, Piazza Leonardo Da Vinci 32, 20133 Milan, Italy), “Buckling strength of GFRP under-water vehicles”, Composites Part B: Engineering, Vol. 32, No. 2, 2001, pp. 89-101, doi:10.1016/S1359-8368(00)00063-9
Chryssanthopoulos, M. K., Giavotto, V., and Poggi, C., "Statistical Imperfection Models for Buckling Analysis of Composite Shells," Buckling of Shell Structures, on Land, in the Sea and in the Air, J. F. Jullien, ed., Elsevier Applied Science Publishing Co., Inc., New York, 1991, pp. 43-52.
M.K. Chryssanthopoulos, V. Giavotto and C. Poggi,
“Characterization of manufacturing effects for buckling-sensitive composite cylinders”, Composites Manufacturing, Vol. 6, No. 2, 1995, pp. 93-101, doi:10.1016/0956-7143(95)99649-D
Marios K Chryssanthopoulos, Carlo Poggi and Andrea Spagnoli, “Buckling design of conical shells based on validated numerical models”, Thin-Walled Structures, Vol. 31, Nos. 1-3, May 1998, pp. 257-270, doi:10.1016/S0263-8231(98)00006-8
M. K. Chryssanthopoulos and C. Poggi, “Collapse strength of unstiffened conical shells under axial compression”, Journal of Constructional Steel Research, Vol. 57, No. 2, February 2001, pp. 165-184, doi:10.1016/S0143-974X(00)00013-4
M. K. Chryssanthopoulos and C. Poggi, “Stochastic imperfection modelling in shell buckling studies”, Thin-Walled Structures, Vol. 23, Nos. 1-4, 1995, pp. 179-200, Special Issue: Buckling Strength of Imperfection-sensitive Shells doi:10.1016/0263-8231(95)00011-2
Marios K. Chryssanthopoulos and Carlo Poggi, “Probabilistic imperfection sensitivity analysis of axially compressed composite cylinders”, Engineering Structures, Vol. 17, No. 6, July 1995, pp. 398-406, doi:10.1016/0141-0296(95)00048-C
Page 110 / 336