|
|
||
|
|
|
|
Department of Civil Engineering
Tsinghua University, Beijing, China
Education:
BSc Sept.1979 – July.1984 Civil Engineering, Tsinghua University
Graduate Sept.1984 – July.1985 Civil Engineering, Tsinghua University
Ph.D Sept.1985 – July.1989 Civil Engineering, Heriot-Watt University
Work Experience:
1989-1992 Structural Engineer, The Steel Construction Institute, UK
1992-1993 Lecturer, Depart. of Civil Engineering, Tsinghua University
1994-1999 Associate Professor, Depart. of Civil Engineering, Tsinghua University
2000- Professor, Depart. of Civil Engineering, Tsinghua University.
2006-2007 Berkeley Scholar, Department of Civil and Environmental Engineering, University of California, Berkeley, USA.
Selected Publications (For more see the link Prof. Yongjiu Shi):
Dengfeng Wang, Yuanqing Wang, Yongjiu Shi and Pingzhou Cao, “Influence of Multiple Cutouts on the Buckling of Large-Scale Thin-Walled Cylindrical Shells of Desulphurizing Tower under Wind Loading”, International Conference on Computer Distributed Control and Intelligent Environmental Monitoring (CDCIEM), 19-20 February, 2011
Shi, G., Liu, Z., Ban, H.Y., Zhang, Y., Shi, Y.J. and Wang, Y.Q. (2012), "Tests and finite element analysis on the local buckling of 420 MPa steel equal angle columns under axial compression", Steel Compos. Struct., Int. J., 12(1), 31-51.
Y.Q. Wang, H.X. Yuan, Y.J. Shi and M. Cheng, “Lateral-torsional buckling resistance of aluminium I-beams”, Thin-Walled Structures, Vol. 50, pp 24-36, January 2012
Huiyong Ban, Gang Shi, Yongjiu Shi and Yuanqing Wang, “Overall buckling behavior of 460 MPa high strength steel columns: Experimental investigation and design method”, Journal of Constructional Steel Research, Vol. 74, pp 140-150, July 2012
H.Y. Ban, G. Shi, Y.J. Shi, Y.Q. Wang, “Residual stress of 460 MPa high strength steel welded box section: experimental investigation and modeling”, Thin-Walled Struct., 64 (2013), pp. 73-82
H.Y. Ban, G. Shi, Y.J. Shi and Y.Q. Wang, “Column buckling tests of 420 MPa high strength steel single equal angles”, International Journal of Structural Stability and Dynamics, Vol. 13. No. 2, 1250069, March 2013
Gang Shi, Huiyong Ban, Yu Bai, Yuanqing Wang, Cui Luo and Yongjiu Shi, “A novel cast aluminum joint for reticulated shell structures: Experimental study and modeling”, Advances in Structural Engineering, Vol. 16, No. 6, pp 1047-1059, June 2013
Huiyong Ban, Gang Shi, Yongjiu Shi and Mark A. Bradford, “Experimental investigation of the overall buckling behaviour of 960 MPa high strength steel columns”, Journal of Constructional Steel Research, Vol. 88, pp 256-266, September 2013
Ban, H.Y., Shi, G., Bai, Y., Shi, Y.J. and Wang, Y.Q. (2013), "Residual stress of 460 MPa high strength steel welded I section: Experimental investigation and modeling", Int. J. Steel Struct., 13(4), 691-705.
H.X. Yuan, Y.Q. Wang, Y.J. Shi, L. Gardner, Residual stress distributions in welded stainless steel sections, Thin-Walled Struct., 79 (2014), pp. 38-51
H.X. Yuan, Y.Q. Wang, L. Gardner, Y.J. Shi, Local–overall interactive buckling of welded stainless steel box section compression members, Eng. Struct., 67 (2014), pp. 62-76
Mehdi Shokouhian and Yongjiu Shi, “Classification of I-section flexural members based on member ductility”, Journal of Constructional Steel Research, Vol. 95, pp 198-210, April 2014
H.X. Yuan, Y.Q. Wang, Y.J. Shi and L. Gardner, “Stub column tests on stainless steel built-up sections”, Thin-Walled Structures, Vol. 83, pp 103-114, October 2014
Lu Yang, Yuanqing Wang, Bo Gao, Yongjiu Shi and Huanxin Yuan, “Two calculation methods for buckling reduction factors of stainless steel welded I-section beams”, Thin-Walled Structures, Vol. 83, pp 128-136, October 2014
Page 261 / 336