|
|
||
|
|
|
|
School of Aeronautics
Northwestern Polytechnical University, Xi’an, China
Selected Publications:
Q. Sun, J.-X. Zhou and L. Zhang , An adaptive beam model and dynamic characteristics of magnetorheological materials, J. Sound Vib. 261 (2003) 465–481.
Ke Liang and Qin Sun, “Researh on the difference between the linear and nonlinear analysis of a wing structure”, Chapter in an unidentified book, pp 159-165, DOI: 10.1007/978-90-481-2822-8_18
Ke Liang, Qin Sun and Xiaxia Shen, “An improved finite element simulation method for plate wrinkling”, International Conference on Intelligent Computation Technology and Automation (ICICTA), 1 May 2010
X.L. Fan, Q. Sun and M. Kikuchi, “Review of Damage Tolerant Analysis of Laminated Composites”, Journal of Solid Mechanics Vol. 2, No. 3 (2010) pp. 275-289
B. Zhang, Q. Sun, "The Ultimate Strength of Stiffened Panel with Overall Buckling", Advanced Materials Research, Vols. 308-310, pp. 1297-1301, 2011
Zhen Wang and Qin Sun, “Geometrically nonlinear analysis using a corotational triangular thick and thin shell element”, Engineering Mechanics, Vol. 31, No. 5, pp 27-33, 2014
Zhen Wang and Qin Sun, “Corotational nonlinear analyses of laminated shell structures using a 4-node quadrilateral flat shell element with drilling stiffness”, Acta Mechanica Sinica, Vol. 30, No. 3, pp 418-429, June 2014
K. Liang, Y. Zhang, Q. Sun, and M. Ruess, “A new robust design for imperfection sensitive stiffened cylinders used in aerospace engineering,” Science China Technological Sciences, vol. 58, no. 5, pp. 796–802, May 2015
Zhao Jing, Xueling Fan and Qin Sun, “Stacking sequence optimization of composite laminates for maximum buckling load using permutation search algorithm”, Composite Structures, Vol. 121, pp 225-236, March 2015
Z. Jing, Q. Sun and V. V. Silberschmidt, Sequential permutation table method for optimization of stacking sequence in composite laminates, Compos. Struct. 141 (2016) 240–252.
Ke Liang and Qin Sun, “Buckling and post-buckling analysis of the delaminated composite plates using the Koiter-Newton method”, Composite Structures, Vol. 168, pp 266-276, May 2017
Ke Liang and Qin Sun, “Reduced-order modeling analysis of shell structures buckling using a co-rotational solid-shell element”, Aerospace Science and Technology, Vol. 70, pp 435-444, November 2017
Y. Chen, J. Feng, Q. Sun, Lower-order symmetric mechanism modes and bifurcation behavior of deployable bar structures with cyclic symmetry, Int. J. Solids Struct., 139/140 (2018), pp. 1-14
Ke Liang, Mostafa M. Abdalla and Qin Sun, “A modified Newton-type Koiter-Newton method for tracing the geometrically nonlinear response of structures”, International Journal for Numerical Methods in Engineering, Vol. 113, No. 10, pp 1541-1560, 9 March 2018
Chen Yang, Ke Liang, Yufei Rong and Qin Sun, “A hybrid reduced-order modeling technique for nonlinear structural dynamic simulation”, Aerospace Science and Technology, Vol. 84, 1 November 2018
Ke Liang, Qin Sun and Yongjie Zhang, “Nonlinear buckling analysis of variable stiffness composite plates based on the reduced order model”, Composite Structures, Vol. 206, pp 681-692, 15 December 2018
P.Q. He, Q. Sun and K. Liang, “Generalized modal element method: Part II – application to eight-node asymmetric and symmetric solid-shell elements in linear analysis”, Computational Mechanics, Vol. 63, No. 4, pp 783-804, April 2019
Zhao Jing, Qin Sun, Ke Liang and Jianqiao Chen, “Closed-Form Critical Buckling Load of Simply Supported Orthotropic Plates and Verification”, International Journal of Structural Stability and Dynamics, Vol. 19, No. 12, 1950157, December 2019
Ke Liang, Chen Yang and Qin Sun, “A smeared stiffener based reduced-order modelling method for buckling analysis of isogrid-stiffened cylinder”, Applied Mathematical Modelling, Vol. 77, Part 1, pp 756-772, January 2020
Page 330 / 336