|
|
||
|
|
|
|
Head, Material Stength Department
Department of Applied Mechanics
Technical University of Lublin, Poland
Selected Publications (for more see the link
Prof. Andrzej Teter):
Teter, A.: Dynamic, multimode buckling of the thin–walled columns with subjected to in–plane pulse loading. International Journal of Non–Linear Mechanics, 45, 207– 218, 2010.
Andrzej Teter, “Dynamic critical load based on different stability criteria for coupled buckling of columns with stiffened open cross-sections”, Thin-Walled Structures, Vol. 49, No. 5, May 2011, pp. 589-595, Special Issue: Recent Research Advances in Stability of Structures
Warminski J., Teter A. (2012), Non-linear parametric vibrations of a composite column un-der uniform compression, Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, Vol. 226, 1921-1938.
Teter A., Kolakowski Z. (2013), Coupled dynamic buckling of thin-walled composite columns with open cross-sections, Composite Structures, Vol.95, 28–34.
Debski H., Kubiak T., Teter A. (2013), Buckling and postbuckling behaviour of thin-walled composite channel section column”, Composite Structures Vol. 100, 195-204.
Hubert Debski, Tomasz Kubiak and Andrzej Teter, “Experimental investigation of channel-section composite profiles’ behavior with various sequences of plies subjected to static compession”, Thin-Walled Structures, Vol. 71, pp 147-154, October 2013
Andrzej Teter, Hubert Debski and Sylwester Samborski, “On buckling collapse and failure analysis of thin-walled composite lipped-channel columns subjected to uniaxial compression”, Thin-Walled Structures, Vol. 85, pp 324-331, December 2014
Ribeiro, P., Akhavan, H., Teter, A., Warminski, J.: A review on the mechanical behaviour of curvilinear fibre composite laminated panels. J. Compos. Mater (2014)
Zbigniew Kolakowski and Andrzej Teter, “Coupled static and dynamic buckling modeling of thin-walled structures in elastic range review of selected problems”, Acta Mechanica et Automatica, Vol. 10, No. 2, 2016
Andrzej Teter and Zbigniew Kolakowski, “Influence of mechanical couplings on the buckling behaviour of thin-walled plates made of general laminates under compression”, Composite Structures, Vol. 167, pp 68-76, April 2017
Andrzej Teter, Radoslaw J. Mania and Zbigniew Kolakowski, “Non-linear multi-mode buckling of non-symmetric FML/FGM thin-walled columns with open cross-sections under compression”, Composite Structures, Vol. 167, pp 38-49, May 2017
Page 20 / 250