|
|
||
|
|
|
|
Dept. of Computer Engineering, Modeling, Electronics and Systems (DIMES)
University of Calabria, Italy
Selected Publications:
D. Bruno, S. Lato and R. Zinno, 'Non linear analysis of doubly-curved composite shells', Compo Eng., 3, 419-435
(1993)
R. Zinno and E.J. Barbero, “General anisotropic shell-type structures analyzed by a 3-D layer-wise constant shear element”, CFC Report No. 93/156, June 1993, Constructed Facilities Center, West Virginia University, Morgantown, WV, USA
Raffaele Zinno and Ever J. Barbero, “A three-dimensional layer-wise constant shear element for general anisotropic shell-type structures”, International Journal for Numerical Methods in Engineering, Vol. 37, pp 2445-2470, 1994
R. Zinno, E.J. Barbero, Total Lagrangian formulation for laminated composite plates analysed by three-dimensional finite elements with two-dimensional kinematic constraints, Comput Struct, 57 (3) (1995), pp. 455–466
E.J. Barbero and R. Zinno, “Analysis of laminated composite plates with three-dimensional layer-wise constant shear elements”, Int. J. Eng. Anal. Des, 1993 (in press)
A. Madeo, R. Casciaro, G. Zagari, R. Zinno and G. Zucco, “A mixed isostatic 16 dof quadrilateral membrane element with drilling rotations based on Airy stresses”, Finite Elements in Analysis and Design, Vol. 80, pp 52-66, October 2014
E. J. Barbero, A. Madeo, G. Zagari, R. Zinno and G. Zucco, “A mixed isostatic 24 dof element for static and buckling analysis of laminated folded plates”, Composite Structures, Vol. 116, 223-234, 2014
Barbero, E.J. Madeo, A., Zagari, G., Zinno, R., Zucco, G., Koiter asymptotic analysis of folded laminated composite plates, Composites Part B: Eng., 61, pp. 267–274, 2014
E.J. Barbero, A. Madeo, G. Zagari, R. Zinno and G. Zucco, “Imperfection sensitivity analysis of laminated folded plates”, Thin-Walled Structures, Vol. 90, pp 128-139, May 2015
Viorel Ungureanu, Dan Dubina, Andrei Crisan, Antonio Madeo, Giuseppe Zagari, Giovanni Zucco and Raffaele Zinno, “Koiter asymptotic analysis of thin-walled cold-formed steel members”, Acta Mechanica et Automatica, Vol. 9, No. 4, December 2015
G. Zagari, G. Zucco, A. Madeo, V. Ungureanu, R. Zinno and D. Dubina, “Evaluation of the erosion of critical buckling load of cold-formed steel members in Koiter asymptotic analysis”, Thin-Walled Structures, Vol. 108, pp 193-204, November 2016
V. Ungureanu, A. Madeo, G. Zagari, G. Zucco, D. Dubina and R. Zinno, “Koiter asymptotic analysis of thin-walled cold-formed steel uprights pallet racks”, Structures, Vol. 8, pp 286-299, November 2016
A. Madeo, R.M.J. Groh, G. Zucco, P.M. Weaver, G. Zagari and R. Zinno, “Post-buckling analysis of variable-angle tow composite plates using Koiter’s approach and the finite element method”, Thin-Walled Structures, Vol. 110, pp 1-13, January 2017
E.J. Barbero, A. Madeo, G. Zagari, R. Zinno and G. Zucco, “Imperfection sensitivity analysis of composite cylindrical shells using Koiter’s method”, International Journal for Computational Methods in Engineering Science and Mechanics, Vol.18, No.1, Special Issue: Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, pp 105-111, January 2017
Page 242 / 250