|
|
||
|
|
|
|
Department of Mechanical Engineering
University of Strathclyde, Glasgow, UK
Honors:
Thin-Walled Structures, Vol. 46, Nos. 7-9, July-September 2008, pp. 963-974, A special issue to mark the Retirement of Professor Jim Rhodes, Founding Editor, doi:10.1016/j.tws.2008.01.033
Selected Publications:
Rhodes J. The nonlinear behaviour of thin-walled beams subjected to pure moment loading. Ph.D.
thesis. Glasgow: University of Strathclyde, 1969
Ritchie, D. and Rhodes, J. (1975) Buckling and post-buckling behavior of plates with holes. Aeronautical Quarterly, 26, 281–96
Rhodes, J. and Harvey, J.M., Examination of plate post-buckling behavior, Journal of the Engineering Mechanics Division, ASCE, 103, EM3, 1977, 461–477.
Banks, W. M., Harvey, J. M., and Rhodes, J., The Nonlinear Behavior of Composite Panels with Alternative Membrane Boundary Conditions on the Unloaded Edges, Dept. of Mech. of Mat., U. of Strathclyde Rept., January 1978.
Rhodes, J., and Marshall, I. H., “Unsymmetrical Buckling of Laterally Loaded Reinforced Plastics Shells,” Proceedings of the Second International Conference on Composite Materials (ICCM/2), edited by B. Noton, R. Signorelli, K. Street, and L. Phillips, Metallargical Society of ASME, Warrendale, PA, 1978, pp. 303–315.
Rhodes J. Secondary local buckling in thin-walled sections. Acta Technica Academiae Hungaricae
1978;87:143–53.
Marshall, I. H., and Rhodes, J., “Snap-Buckling of Thin Shells of Rectangular Planform,” Stability Problems in Engineering Structures and Components, edited by T. H. Richards and P. Stanley, Applied Science Publisher, London, 1979, pp. 249–264.
Rhodes J. On the approximate prediction of elasto-plastic plate behaviour. Proc Inst Civ Engrs
1981;71:165–83.
Banks, W. M., and Rhodes, J. (1981). ‘‘The post-buckling behavior of composite box sections.’’ Proc., Int. Conf. on Compos. Struct., Applied Science Publishers, Essex, England, 402–414.
Rhodes, J., and Marshall, I. H., “On the Use of Effective Width Concepts for Composite Plates,” Proceedings of the 2nd International Conference on Composite Structures (Edited by Marshall, I. H.), Applied Science, 1982, pp. 335-351.
Banks, W. M., and Rhodes, J. (1983). ‘‘The instability of composite channel sections.’’ Proc., Int. Conf. on Compos. Struct., Applied Science Publishers, Essex, England, 442–452.
Banks, W. M., and Rhodes, J., (1983) The Instability of Composite Sections, 2nd Int. Conf. On Composite Structures, Paisley, UK, Elsevier, 442-452.
Rhodes, J., Walker, A.C. (Editors.): Developmemnts in Thin-Walled Structures, Applied Science Publ., London, Vol. 1 (1982), Vol. 2 (1984), Vol. 3 (1987, digital version 2005, Taylor & Francis)
Rhodes J. Microcomputer design analysis of plate post-buckling behaviour. J Strain Anal
1986;21:71–6.
Seah, L. K. and Rhodes, J., Simplified Buckling Analysis of Plates with Compound Edge Stiffeners, ASCE Journal of Engineering Mechanics, Vol. 119 No. 1, p-19 (1993)
K.H. Hoon and J. Rhodes, “Intermediately stiffened plates in uniaxial compression”, International Journal of Solids and Structures, Vol. 31, No. 5, March 1994, pp. 711-732
James Rhodes, “A semi-analytical approach to buckling analysis for composite structures”, Composite Structures, Vol. 35, No. 1, May 1996, Pages 93-99, Special Issue: Stability of Composite Structures,
Kotelko M, Lim TH, Rhodes J. Post-failure behaviour of box section beams under pure bending
(an experimental study). Thin-Walled Struct. 2000;38(2):179–94.
Thin-walled structures: Advances and Developments, Proceedings of the Third International Conference (ICTWWS 2001), edited by Jan Zaras, Katarzyna Kowal-Michalska, J. Rhodes, Elsevier Science, 2001
For more see the link:
Prof. James Rhodes
Page 169 / 336