|
|
||
|
|
|
|
Department of Aeronautical and Vehicle Engineering, Division of Lightweight Structures
KTH Royal Institute of Technology, Stockholm, Sweden
Selected Publications:
Shipsha A, Hallstrom S and Zenkert D. Failure mechanics and modelling of impact damage in sandwich beams – a 2D approach: Part I – experimental investigation. Journal of Sandwich Structures and Materials, 2003; 5: 7–31.
Shipsha A, Hallstrom S and Zenkert D. Failure mechanics and modelling of impact damage in sandwich beams – a 2D approach: Part II – analysis and modelling, Journal of Sandwich Structures and Materials, 2003; 5: 33–51
Kelly G, Hallstrom S. Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearance. Compos Part B-Eng 2004; 35: 331–343.
Kelly, G. and Hallstrom, S. [2005] “ Strength and failure mechanisms of composite laminates subject to localized transverse loading”, Composite Structures 69, 301–314
F. Stig and S. Hallstroem, “Constitutive modeling of composite materials with full 3D orientation of reinforcement”, 14th European Conference on Composite Materials, 7-10 June 2010, Budapest, Hungary, Paper ID: 598-ECCM14
A. Lindström; and S. Hallström, “Energy absorption of SMC/balsa sandwich panels with geometrical triggering features,” Compos. Struct., vol. 92, no. 11, pp. 2676–2684, 2010
Fredrik Stig and Stefan Hallstroem, “Modelling of composites containing 3D-woven reinforcement”, Proceedings of the 3rd World Conference on 3D Fabrics and Their Applications, Wuhan, China, 20-21 April 2011
Benoit Wucher, Stefan Hallstroem, David Dumas, Thomas Pardoen, Christian Bailly, Philippe Martiny and Frederic Lani, “Non-conformal finite element homogenization applied to woven composites with complex textile architectures”, 20th International Conference on Composite Materials, Copenhagen, 19-24 July 2015
B. Wucher, S. Hallstroem, D. Dumas, T. Pardoen, C. Bailly, Ph. Martiny and F. Lani, “Non-conformal mesh based finite element strategy for 3D textile composites”, Journal of Composite Materials, September 2016, DOI: 10.1177/0021998316669875
Moeen S. Rajput, Magnus Burman and Stefan Hallstroem, “Impact resistance and damage tolerance assessment of composite sandwich materials for aircraft”, 12th International Conference on Sandwich Structures (ICSS-12), Lausanne, Switzerland, 19-22 August 2018
Fredrik Stig and Stefan Hallstroem, “Effects of crimp and textile architecture on the stiffness and strength of composites with 3D reinforcement”, Advances in Materials Science and Engineering, Vol. 2019, Article ID 8439530, 2019
Moeen S. Rajput, Magnus Burman, Joonas Koell and Stefan Hallstroem, “Compression of structural foam materials – Experimental and numerical assessment of test procedure and specimen size effects”, Journal of Sandwich Structures & Materials, Vol. 21, No. 1, pp 260-288, January 1, 2019
Moeen S. Rajput, Magnus Burman, Fredrik Forsberg and Stefan Hallstroem, “Experimental and numerical study of the response to various impact energy levels for composite sandwich plates with different face thicknesses”, Journal of Sandwich Structures and Materials, Vol. 21, No. 5, pp 1654-1682, June 2019
Anton Shipsha, Stefan Hallström, Magnus Burman, “Effect of stacking sequence and bundle waviness in quasi-isotropic NCF composites subjected to compression”, Composites Part B: Engineering, Vol. 178, Article 107423, 1 December 2019
Page 8 / 404