|
|
|
|
|
|
|
Axially oriented external corrugations on the payload shroud (not to scale) |
|
Schematic of the joint in the payload shroud that buckled during a test |
|
Photograph of the actual buckles represented schematically in the previous slide |
|
Axisymmetric cryogenic cooler to be analyzed by BOSOR4/BIGBOSOR4 |
|
Segmented model of the shell of revolution that represents the cryogenic cooler to be analyzed by BOSOR4/BIGBOSOR4 |
|
|
|
|
|
|
|
|
|
First 4 vibration modes of the axisymmetric cryogenic cooler shown in the previous two slides |
|
An axisymmetric elastic-plastic torispherical pressure vessel that buckles under uniform external pressure |
|
Discretization and pre-buckling axisymmetric deformation of one of the externally pressurized torispherical shells |
|
Comparison of test and BOSOR5 theory for buckling of externally pressurized torispherical Specimens A3 - A6 |
|
Intersecting cylindrical shells |
|
|
|
|
|
|
|
|
|
Limit failure mode of cylindrical shell with nozzle |
|
A deep-submergence pressure hull that consists of a number of intersecting spherical segments with supporting ribs |
|
Compound cone-cylinder shell with rings |
|
An example of a ring-stiffened compound shell of revolution that can buckle under various combinations of applied loads |
|
Typical pressure hull structure |
|
|